OPERATING INSTRUCTIONS
16
Maintanance and Cleaning
The AirBoy nano4 is a low maintenance machine. There may be wear that occurs over
time due to abrasion and wear parts should be replaced when this occurs. Furthermore
there can occur typical contamination or residues of film or dust at the AirBoy nano4.
Our recommendation:
After 30 roll changes
or if required:
1)
Check Teflon belts and replace as the circumstances require.
2)
Check transport rolls regarding contamination and grip clean or replace if
necessary.
3)
Check blade, see the cutting of the film, if necessary replace (page 12)
4)
If necessary clear the machine of contamination and residue of film. Consider also
knife slot at air pipe, sealing block and other areas of the machine.
