background image

- 08 -

It is necessary to check whether the various components of the SE3T are securely installed, without 

damage, and the brake function and tires are in good condition.

You need to fully understand the surrounding cycling environment: make sure you are not disturbed by cars, 

pedestrians, pets, bicycles and other obstacles.

1.

2.

Power button

All rights reserved in this manual shall be the property of the company.

Note:

Do not store cash or valuables in your suitcase.

The safety and reliability of brakes, boxes, wheels, wheels, etc. must be confirmed before riding to avoid 

accidents.

Avoid riding on uneven, muddy, rocky roads, slippery roads, waterlogged roads and stairs to prevent rim 

deformation and danger.

The torch can not be hung on the ride, so as to avoid the operation of out of control accident.

This product is suitable for one person riding.

Overloading and crawling ramps greater than 15 degrees are strictly prohibited.

People who are still under the force of drugs or alcohol, have limited mobility and responsiveness are 

prohibited from riding.

Riding is prohibited in cases where it is not suitable for riding due to the cyclist's own reasons or other 

objective factors.

It's important to get the habit of charging in time every day, when you ride with a minimum allowed voltage 

before you can keep your battery in place for longer, so it's important to get into the habit of charging in 

time every day. Almost all kinds of batteries are affected by the environment. In general, the discharge 

performance of electricity is better when the temperature is higher, and when the temperature drops below 

0C, the battery's power may drop by more than one-third.

Therefore, when winter comes or in cold areas, the reduction of the mileage after a single charge is normal, 

when the temperature rebounds to more than 20 degrees Celsius, its function naturally recovers. Remove 

dust from the power plug regularly.

Ash accumulation in humid environments such as may cause fire hazards. Do not damage, force bend, or 

bundle the power cord.

Do not place heavy objects on the power cord or expose them to places that emit excessive heat.

Do not insert foreign objects at USB ports, charge-discharge connectors, or other openings of the product.

Do not split the individual parts of the suitcase yourself.

Do not lift the suitcase with a lever handle. Lift the suitcase when crossing the steps or steps.

Pulling the suitcase over the steps or steps can cause the suitcase to tip over and damage.

In a moving car, uneven or sloping place, place the suitcase on the ground to prevent it from tipping over 

and damaging. Do not place the luggage in a damp and unventilated and acidy environment for long periods 

of time. If wet by the rain, please dry it in time.

Prohibit the placement of suitcases in high temperature, fireworks.

Do not wipe the suitcase with corrosive solvents such as banana water and petroleum concentrate.

Do not rinse directly with water and use it in rainy days.

When closing the suitcase, be aware that your body or clothes should not be caught in the case or locked.

Be careful of liquid leaks in the luggage, which may cause a short circuit in the inner compartment.

The Company is not responsible for prohibiting the use of charging cables and other accessories that are 

not exclusively designed by the Company and in the event of an accident. 

Unauthorized removal or modification of this suitcase is prohibited, and the Company will not be liable for 

the resulting damage and may deprive you of your warranty commitment. In the event of an internal failure, 

contact the aftermarket personnel.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

Summary of Contents for SE3T













Reviews: