17
Connection
The module is a device which connects to the Airzone connection bus of the main board. Control relay specs: Imax = 10 A at
110/230 Vac, voltage-free.
Note that to control elements with a greater power, it is recommended to use contactors in accordance with the power
required. Remember to connect the neutral connector directly from the circuit to the element to be controlled.
It has a 5-pin terminal to connect it to the Airzone connection bus of the main board
. Attach
the wires with the terminal screws following the color code.
Power supply is connected to the module through a 3-pin terminal
. Attach the wires with
the terminal screws following the color code.
Important:
According to the current local and national regulations, it is mandatory to add a switch (or other element to
disconnect the system) to the external supply wiring so that a constant separation between poles is guaranteed. The system
will restart automatically if the supply is eventually turned off.
AIRZONE RADIANT365 CONTROL MODULE FOR WIRED VALVES 110/230V VALC (AZRA6CM1VALC)
Assembly
The module is mounted on DIN rail or on the wall. It is externally powered at 110/230 Vac. Location and installation of the
module must comply the current electronic rules.
Note:
To take the module away, pull the reed down to release it.
Significado
Power supply
Airzone connection bus
Dehumidifier control relays
LED of relays state
Operation of the relays
Y-O
On / Off
V
1
-O
Speed 1
V
2
-O
Speed 2
V
3
-O
Speed 3
W-O
On / Off
Summary of Contents for 8435418928905
Page 1: ...r e b m u N e g a P d r a o b p il C Installation Manual RADIANT365 AZRA6RADIANT AZRA6CM1VALC...
Page 2: ...1 8 ZONES AZRA6RADIANT AZRA6CM1VALC...
Page 35: ...36 Blueface Think Important Use to confirm and to return...
Page 49: ...50 NAVIGATION TREES NAVIGATION TREE BLUEFACE THERMOSTAT...
