20
Connection
The Airzone thermostats are connected to the Airzone connection bus of the main board.
Attach the wires with the terminal screws following the color code.
Important:
Use a suitable screwdriver to press in the locking tabs.
Note:
To connect more than 4 Blueface, it is necessary an external power supply (AZX6POWER). These values can be altered
depending on the separation distance among them.
AIRZONE WIRELESS THERMOSTAT (AZRA6THINKR / AZRA6LITER)
Assembly
Wireless thermostats are mounted on the wall through a support. It is recommended not to locate it more than 40 meters away
from the main control board.
To fix it to the wall, follow these steps:
•
Remove the back of the thermostat and insert the CR2450 button battery.
•
Fix the back part of the thermostat to the wall.
•
Place the display on the support once it is fixed.
•
Place the anti-theft rods for additional support.
Changing batteries
When a wireless Think thermostat is running out of battery, it displays this icon
on the screensaver. In the case of wireless
Lite thermostats, a warning message will be displayed on the Blueface. In order to know the zone of the Lite thermostat(s)
running out of battery press on the warning icon.
Summary of Contents for 8435418928905
Page 1: ...r e b m u N e g a P d r a o b p il C Installation Manual RADIANT365 AZRA6RADIANT AZRA6CM1VALC...
Page 2: ...1 8 ZONES AZRA6RADIANT AZRA6CM1VALC...
Page 35: ...36 Blueface Think Important Use to confirm and to return...
Page 49: ...50 NAVIGATION TREES NAVIGATION TREE BLUEFACE THERMOSTAT...
