16
ES
EN
FR
IT
PT
EN
NAVIGATION AND CONTROL
MAIN SCREEN
The Main Screen enables the access to the management of the Zones, Scenes, Schedules and the Alarms Center. Access to the
Settings Menu and to the weather forecast screen from this screen.
The alarm icon shows a notification if there is a technical alarm, press the icon to obtain information about this alarm, you
can enable/disable the alarms notification
(
see section
ZONES
The AT-Home system enables the management of up to 30 zones and the devices (up to 15
per variable
) associated to
any zone of the installation. From the “Zones” screen it is possible to control the devices associated to each zone of the
installation individually or all of them at the same time.
Access to the Zones menu from the Main Screen to see all the available zones and press the desired scene to control all the
devices associated to it.
The system enables changing the icon and edit the name of an existing zone:
•
Change Icon.
To change the zone’s icon, press and hold the icon until the edit icon arrows are viewable, navigate to
right or left using the arrows and select the desired icon.
•
Edit name.
To change the zone’s name, press and hold the name of the zone until the name box is visible and modify
it (up to 15 characters).
Depending on each zone configuration the variables to control are: Lighting, Air Conditioning, Blinds, etc.
