10
EN
(by default, 17°C).
•
Offset. Correction of the room temperature of the different zones of the system in both
cooling and heating mode, with a correction factor between -2.5°C and 2.5°C in steps of
0.5°C. By default, it is set to 0°C.
Digital inputs
•
Presence. Allows control of the status of a zone module based on the detection of
occupancy.
•
Window. Allows control of the status of a zone module based on the detection of an open
window.
•
Eco function. Modifies the selected set-point temperature (+/-2.5°C) for more efficient
management of the thermal demand of its zone.
