12
EN
DEVICE CONTROL. Z-WAVE APPLICATION COMMAND CLASS MAP-
PING
Description
Values
Z-Wave Command
On/Off
Off
Thermostat_Mode
On
Thermostat_Mode
SetPoint
- SetpointType: (Heating,
Cooling, Dry Air)
- SetPointValue: (tenths of °C)
Thermostat_Setpoint
LocalTemp
Room temperature x10
Sensor_Multilevel
Modes
OFF
Auto chageover
Cooling
Heating
Fan
Dry
Thermostat_Mode
Speed
Auto - Medium
Low
Medium
High
Off
Thermostat_Fan_Mode
Warning
Max 2 Byte
Notification(*)
Error
Max 2 Byte
The Aidoo Z-Wave Plus controller acts as a gateway between the air conditioner controller
interface and the Z-Wave network. The Aidoo Z-Wave Plus interacts with the proprietary
protocol of the different A/C manufacturers converting the orders into Modbus commands to
trigger the Z-Wave network commands.
The monitoring/control items supported by the Aidoo Z-Wave Plus are mapped to the standard
Thermostat Command class object types defined by the Z-Wave protocol. The user can interact
with the air conditioning system through the Z-Wave network with the following supported
monitoring/control items.
(*) For the Notification Z-Wave command class, the Aidoo Z-Wave Plus reserves 2
alphanumeric bytes to represent the Air conditioning unit warnings and error codes. The
warnings and error codes are represented in a different way according to each manufacturer.
Please refer to the manufacturer's installation manual to check the meaning of the different
codes.
Group
ID
Group
Name
N° of max nodes
supported in the
group
Description
Command sent
1
Lifeline
1
Life Line
Group
DEVICE_RESET_LOCALLY_NOTIFICATION
THERMOSTAT_FAN_MODE_REPORT
INDICATOR_REPORT
THERMOSTAT_MODE_REPORT
THERMOSTAT_SETPOINT_REPORT
SENSOR_MULTILEVEL_REPORT
NOTIFICATION_REPORT
