10
EN
The Aidoo Z-Wave Plus can be added
into a Z-Wave network by scanning the
Z-Wave QR Code present on the product
with a controller providing SmartStart
inclusion. No further action is required
and the SmartStart product will be added
automatically within 10 minutes of being
switched on in the network vicinity.
The SmartStart QR and the full DSK string
code can be found on the front side of
the Aidoo Z-Wave Plus. The PIN is the
first group of 5 underlined digits of the
DSK identified as DSK in the left side of
the sticker. If you plan to use the DSK, it is
important that you take a picture of the
label and keep it in a safe place.
S2 SECURE INCLUSION
When adding the Aidoo Z-Wave Plus to a Z-Wave network with a controller supporting Security
2 Authenticated (S2), the PIN code of the Z-Wave Device Specific Key (DSK) is required. The first
five digits of the unique DSK code are the key PIN code and is printed on the product label.
Z-WAVE COMMUNICATION
SUPPORTED COMMAND CLASSES
Command class
Version Non-Secure CC Secure CC
BASIC
2
x
ZWAVEPLUS_INFO
2
x
ASSOCIATION
2
x
MULTI_CHANNEL_ASSOCIATION_V2
3
x
ASSOCIATION_GRP_INFO
3
x
TRANSPORT_SERVICE
2
x
VERSION
3
x
MANUFACTURER_SPECIFIC
2
x
DEVICE_RESET_LOCALLY
1
x
INDICATOR
3
x
POWERLEVEL
1
x
SECURITY 0
1
x
DSK Z-Wave
