9
EN
Standard Inclusion
The Aidoo Z-Wave Plus is compatible with all Z-Wave/Z-Wave Plus certified controllers. The
device supports both the Network SmartStart inclusion mechanism (which offers the ability
to be included in a network, even if the device is not directly connected to the controller) and
Standard Inclusion.
By default, the inclusion procedure starts in Normal Inclusion mode and after a short timeout
the procedure continues in Network Wide Inclusion mode that lasts for about 20 Seconds.
If the Aidoo Z-Wave Plus has not been included yet into the Z-Wave network, the
LED will
remain off. The procedure of inclusion is activated by pressing the Association Button . As
soon as the inclusion procedure initiates, the LED remains steady red until the device is
included in the network.
Standard exclusion
Only a controller can remove the device from the network. After activating the exclusion
function by the controller, the device can be removed by setting it in Learning Mode.
If the Aidoo Z-Wave Plus is already included into the Z-Wave network, the
LED will remain
steady blue. The procedure of exclusion is activated by pressing the Association Button . As
soon as the exclusion procedure initiates, the LED remains steady red until the device is
excluded of the network.
SMARTSTART INCLUSION
Z-Wave SmartStart aims to shift the tasks related to inclusion of an Aidoo Z-Wave Plus into
a Z-Wave network away from the Aidoo device itself, and towards the more user-friendly
interface of the gateway.
Z-Wave SmartStart removes the need for initiating the Aidoo device to start inclusion. Inclusion
is initiated automatically on power-ON, and repeated at dynamic intervals for as long as the
device is not included into a Z-Wave network. As the new device announces itself on power-ON,
the protocol will provide notifications, and the gateway can initiate the inclusion process in the
background, without the need for user interaction or any interruption of normal operation. The
Smart Start inclusion process only includes authenticated devices.
CONFIGURATION
The Aidoo Z-Wave Plus is compatible with all Z-Wave/Z-Wave Plus certified controllers. The
device supports both the Network Wide Inclusion mechanism (which offers the ability to be
included in a network, even if the device is not directly connected to the controller) and Normal
Inclusion.
By default, the inclusion procedure starts in Normal Inclusion mode and after a short timeout
the procedure continues in Network Wide Inclusion mode that lasts for about 20 Seconds.
ADD/REMOVE AIDOO Z-WAVE PLUS INTO A Z-WAVE NETWORK
(CLASSIC)
