23
EN
The Webserver HUB is connected to the system’s control board domotic bus.
AZX6WSPxxx from a system control board to other system control boards
To connect the Webserver HUB to a CCP, use the latter’s external domotic bus 2.
ON
1 2
Bus 1
Bus 2
D34D35
D3
D11
D9
D8
AZX6WSPxxx from a AX6CCPGAWI to system control units
...
ON
1 2
Bus 1
Bus 2
ON
1 2
ON
1 2
There is one 5-pin terminal available for connection to the domotic bus of the control board.
Attach the wires with the terminal screws following the colour code. Use the ground only in the
connector on the side of the control board.
ROUTER (Ethernet) - AZX6WSPxxx
ROUTER (Wi-Fi) - AZX6WSPxxx
All Airzone systems must be connected to the Internet to provide technical support.
- AZX6WSC5GER / AZX6WSPHUB:
Only
one Webserver per installation needs to be connected
(control up to 32 systems).
- AZX6WSPLUT:
Only
one Webserver HUB Airzone-Lutron per installation needs to be
connected
(control up to 32 systems). All the control boards must be properly addressed.
- AZX6WSPBAC:
One
Webserver HUB Airzone-BACnet per system
must be connected
.