33
FR
AIRZONE CONSUMPTION METER (AZX6ACCCON)
Assembly
Connection
Reset
This device is DIN rail mounted. This module is externally powered at 110/230 VAC. The location
and assembly of this module must comply with current electronic regulations.
The Airzone consumption meter is an element that is connected by means of an ammeter
clamp to the wiring of the outdoor unit to measure the installation's consumption.
Note:
To remove the module, pull the tab
downwards to release it.
The power connection to the module
is via a 2-pin terminal. Fix the cables with the screws
on the terminal, following the polarity.
To connect to the Airzone system main control board, carry out the following steps:
1.
Open the system's wireless channel.
2.
Press
to associate the consumption meter.
3.
The LED
will be displayed in search status (blue) and will change to associated (green).
If it doesn't, please refer to the self-diagnostics section.
If you need to reset the consumption meter to factory settings, press and hold the button
until the LED
changes to search status (blue). Wait for the LEDs to return to their normal
status and then repeat the initial configuration. .
For further information, see the
.