35
EN
Remove the fixed elliptical neck by
undoing the screws. Remove the protective
plate that covers the outside air intake and
reattach the elliptical neck.
Bend or cut the cover found in the lower
part of the supply dampers to allow the air
to pass through.
Fresh air intake (CMV) assembly
Remember that the motorized elements are numbered in the following
manner:
Connect the duct from each zone to its
corresponding damper. Follow the instructions for
proper insulation. Make a cut in the duct to keep the
motor outside.
If your Easyzone has CMV and you wish to use this function.
