39
EN
POWER SUPPLY TO THE SYSTEM
Use power supply input to power the main
control board at 110/230 VAC as well as
any other control elements that require
external power supply. Use 3x1.5 mm²
cable. To supply power to the main control
board, loosen the cable gland if necessary,
insert the cable through the hole (Ø: 5 -10
mm) and attach the cables to the terminal
following the polarity indicated. Connect
the terminal to the power supply input
and tighten the cable gland to attach the
power supply cable.
The connection to the external power
supply must include a main switch or
other method of disconnection that
includes a constant separation for all
polarities, in accordance with appropriate
local and national regulations. The system
will automatically restart if the power
supply is turned off. Use separate circuits
for the unit that is to be controlled and the
power supply to the system.
Once all the connections have been made,
make sure the cover of the main control
board is correctly replaced.
