26
ES
EN
FR
IT
PT
DE
ADVANCED USE OF THE THINK THERMOSTAT
Setting Parameters
Press the Setting Menu icon to access the parameters.
Sleep Mode.
Works as an auto power-off Eco-timer of the zone. These are the values to select:
Off.
The timing is off.
30.
It activates the timing and switches off the zone after 30 minutes.
60.
It activates the timing. After 30 minutes, the zone varies one degree its temperature. After 60 minutes, the zone
will switch off.
90.
It activates the timing. After 30 minutes, the zone varies one degree its temperature. After 60 minutes, the zone
varies another degree the temperature. Finally, after 90 minutes, the zone will switch off.
Zone settings.
From this menu you can access to:
Anti-freezing.
It prevents the room temperature from dropping below 12° C, although the zone is off. This feature
only activates when the zone is set in heating mode.
Information.
This parameter provides information about the zone: firmware, association or status of the
communications.
Depending on the type of installation and on how your system is configured, there are some extra functionalities:
Grille angles.
Only available for installations with RINT and RIC intelligent grilles control. Defines the angle of the grilles
of the zone for cooling and heating modes. It is defined at 90° by default.
WARNINGS AND INCIDENTS
The Airzone Think Thermostat screensaver displays several system warnings.
Warnings
Low battery.
Displayed when the interface has low battery. It has 2 weeks of life
left in normal conditions.
Anti-freezing.
It will be only displayed when it is activated.
Active window.
It indicates that the air conditioning of the zone has been
deactivated due to opened window. Only available if the window contact of the
system is activated.
Active presence.
It indicates that no occupancy has been detected in the zone for
the last 5 minutes. Therefore, the Sleep mode is activated (the zone will switch off
after 90 minutes). Only available for systems with occupancy control.
Dry contact active
. It indicates that the dry mode has been activated, an
opening/closing of the motorized element or the electrovalve has been
performed depending on the configured working logic. Only available for
installations with Airzone intelligent grilles control.
Errors
The system has a mechanism to control all the incidents. If any message error is displayed, please contact your installer.
