25
WIRED CONTROLLERS (AZVAFBLUEFACEC / AZVAFTHINKC / AZVAFLITEC)
Assembly
Airzone controllers are mounted on the wall through a support. It is recommended not
to locate it more than 40 meters (131 feet) away from the control board. To fix it to the
wall, follow these steps (Fig. 30):
•
Separate the back part of the controller from the wall support and make all the
connections.
•
Fix the back part of the controller to the wall.
•
Place the display on the support once it is fixed.
Connection
Airzone controllers are connected to the zone module to be controlled. Attach the wires with the
terminal screws following the color code (Fig. 31).
Important:
Use the provided tool to press in the locking tabs (Fig. 32).
WIRELESS CONTROLLERS (AZVAFTHINKR / AZVAFLITER)
Assembly
Wireless controllers are mounted on the wall through a support. It is recommended not to locate it more than 10 meters (33
feet) away from the zone module.
To fix it to the wall, follow these steps (Fig. 33):
•
Separate the back part of the controller from the wall support and insert the
CR2450 button battery.
•
Fix the back part of the controller to the wall.
•
Place the display on the support once it is fixed.
Changing batteries
When a Think controller is running out of battery, it displays this icon
on the screensaver (Fig. 34). In the case of the wireless
Lite controllers, a warning message will be displayed on the Blueface. In order to know the zone of the Lite controller(s) running
out of battery press on the warning icon (Fig. 35).
Fig. 32
Fig. 30
Fig. 31
Fig. 33
