19
EN
EN
FR
IT
PT
DE
−
Name.
Shows the name of the zone.
−
Zone ID.
Shows the zone number assigned among the available.
−
Linked zones.
Shows displays the control outputs associated with the
controller.
−
Basic mode.
The zones can be set in Basic or Advanced mode. They are set in
Advanced mode by default. These are the parameters you can control in basic
mode: On/off, set-point temperature, airflow/fan speed and operation mode.
−
User mode setpoint.
This option is used to configure the set point temperature
of each user mode for each zone:
o
Comfort.
Heat: 15 to 30˚C / 59 to 86˚F by default 20˚C / 68˚F. Cool: 18
to 30˚C / 64 to 86˚F, by default 24˚C / 75˚F.
o
Eco.
Heat: 15 to 30˚C / 59 to 86˚, by default 19˚C / 66˚F. Cool: 18 to
30˚C / 64 to 86˚F, by default 25˚C / 77˚F.
o
Unoccupied.
Heat: 15 to 22˚C / 59 to 72˚F, by default 17˚C / 63˚F.
Cool: 24 to 30˚C / 75 to 86˚F, by default 27˚C / 81˚F.
o
Vacation.
Heat: 10 to 16˚C / 50 to 61˚F, by default 10˚C / 50˚F. Cool:
29 to 35.5˚C / 84 to 96˚F, by default 35˚C / 95˚F.
−
Offset.
Correction factor for the room temperature of the zones (range: from -
2.5˚C to 2.5 ˚C / -5˚F to 5˚F in steps of 0.5˚C / 1˚F). It is in 0˚C / 0˚F by default.
−
Stages.
This parameter is used to select cooling/heating stages in the zone.
These are the features to be configured:
•
Air
. This allows you to enable heating/cooling by air in the zone selected
and to configure whether the unit is a direct expansion or water unit.
•
Radiant
. This allows you to enable radiant heating in the zone selected
and to configure whether the unit is a water, an electrical or an auxiliary
unit (Air supply function), independently of whether the latter is an
electric or water unit, for the air in a zone or for an individual AC unit.
−
Flow.
o
Weight.
This option is used to set the weight of each zone for purposes of
determining system operation. The weight of the zone will be used for
calculating the mode (auto-change over) or for calculating heat demands
when using auxiliary heat. It is an indicator of the size / importance of the zone.
Possible values range from 1-100. By default, the weighting is set to Auto and
each zone's weight is automatically generated based on the number of zones.
For example, if there are four zones, each zone's weight is automatically set to
25. If this option is disabled, the weight of the zone can be set manually
−
Inputs.
It determines the state of the module of a zone based on the occupancy
or the opening of the window:
o
Window.
This option allows the control the state of a zone module
based on the opening of the window. It only has effect on the control
element of the zone module. When this contact is on, if it detects any
