R400NG
15
11
GPS RECEIVER
The R400NG contains an integral GPS receiver allowing positional data and AIS data to be output
together from the receiver.
A standard active 5 volts dc GPS antenna with a gain between 10 and 30 dB needs to be connected
to the TNC connector on the rear of the R400NG for the GPS receiver to work.
By default the GPS receiver will output the following NMEA messages:
GPGGA, GPGSA, GPGSV, GPRMC
11.1
GPS Receiver Technical Specification
●
Channels:
12 Parallel Channels
●
Frequency:
1575.42 MHz
●
WAAS:
Yes
●
Datum:
Default WGS84
●
Update Rate: 1 sec
●
Hot Start:
6 sec
●
Warm Start:
35 sec
●
Cold Start:
45 sec
Summary of Contents for 001-1044
Page 2: ......
Page 5: ...R400NG 5 1 R400NG AIS RECEIVER WITH GPS AND ETHERNET ...
Page 22: ...R400NG 22 ...
Page 23: ...R400NG 23 ...
