Aisino RCK-600 User Guide
④ Replace jammed card back to the card cassette.
⑤ Close the card feed cover and the printer covers.
⑥ Press the
SET Key
. The error message disappears from the LCD display and the
printer restarts.
To take out jammed card in
the thermal retransfer unit
When card jam occurs, the LCD display prompts “Feeder Card Jam" and the print job
stops. Do not turn off the printer as the uncompleted print job will be lost.
① Open the top cover
。
② Take out the card cassette.
③ Rotate the feeding knob in counter
-
clockwise direction. Take out the jammed card
from the cleaning section.
④ Replace jammed card back to the card cassette.
⑤ Close the card feed cover and the printer covers.
⑥ Press the
SET Key
. The error message disappears from the
LCD display and the
printer restarts.
To take out card jammed in the reverse section
① Open the top cover and front cover.
② Take out the card cassette.
③ Release the lock and lift it up as shown in the diagram.
④ Take out the cleaning roller and cleani
ng cartridge.
⑤ Rotate the reverse knob. Turn the feeding knob back and forth. The jammed card
may come out from the left or right card slot.
⑥ Replace jammed card back to the card cassette.
⑦ Make sure the retransfer film is not shifted by this process. Put flattening part,
cleaning roller/cartridge, and card cassette back in place. Close the printer cover.
⑧ Press the
SET Key
. The error message disappears from the LCD display and the
printer restarts.
83