Communication with PC____________________________________________________
____________________________________________________________________ aitronic
4-2
Software Installation
For cable bound communication between MDE device
and PC the program
MTWin
has to be installed.
In order to run MDE device
software updates the installation of
M16Start
is
required.
For wireless communication the program
WinDECT
is required.
For subscription of MDE devices
with DECT modules at the DECT Accesspoint the
program
DECTOR II
is required.
MTWin
For the installation of MTWin open SETUP.EXE in directory MTWin of the enclosed
CD and follow the installation instructions.
M16Start
For the installation of M16Start please follow the following steps
•
Open SETUP.EXE in index M16Start of the enclosed CD and follow the
installation instructions.
•
In EXPLORER under View/Order Options/File Type link file extension „MOT“ to
MT16START.EXE.
M16Start may also be executed with the following command line parameters:
M16Start [-COM=comport] filepath
comport
may be:
1...n
(COMn) or
nn.nn.nn.nn:port
(IP address)
WinDECT
Directory WinDECT from the CD has to be copied to any directory of your PC.
There must be unrestricted access rights for this directory.
DECTOR II
Directory DECTOR from the CD has to be copied to any directory of your PC.
