Introduction to Operation ___________________________________________________
____________________________________________________________________ aitronic
5-6
If nothing functions
In the case that all the previous instructions have been followed and still scanning
of bar codes has been unsuccessful:
•
Make sure that the accumulators are fully charged.
•
Ensure that the MDE device
is set up for the type of bar code you are trying to
read.
•
Ensure that the bar code you are trying to read is not damaged or not dirty.
Examine the print quality of the bar codes.
Should all these tests have been performed and the bar codes can’t still be read,
please contact your dealer for further information.
Activating Barcode Scanner or Transponder Reader
By means of options menu item
Transponder
switching from barcode to
transponder capturing can be performed.
Client specific applications generally activate barcode scanner respectively
transponder reader depending on the actual input fields properties, so that
switching isn’t required by the user.
Scanning Barcodes
If there were transponder tags captured before with the Standard Program
switching to barcode capturing by means of options menu item
Transponder
is
required.
Hold down key
SCAN
and direct the scanner beam to the barcode to be read.
Choose the destination between MDE device
and barcode in that way that the
scanner beam totally covers the barcode.
The MDE device
responds to a successful scanning with the decoding beep and
shows the scanned article number.
