Standard Application 03000 ________________________________________________
____________________________________________________________________ aitronic
12-23
Message „Data Memory full!“
The data flash is full. The data has to be transmitted and the data memory has to
be erased.
Cable bound Data Transmission
The
black
9-pole Sub-D-connector of the communication cable has to be
connected to the appropriate interface of the PC (default MTWin setting: COM1).
The mains adapter has to be connected to the
black
9 pin Sub-D-connector and to
220 V mains.
The data transfer is carried out by MTWin. For data transfer to be carried out the
mask of the standard program must be displayed.
After connecting the communication cable (if the communication cable is already
connected, it first must be disconnected) the data transfer follows either
automatically called up by means of MTWin or the data will be marked as
“transmitted“ (depending on appropriate MTWIN setting). During the data transfer a
progress bar shows the data transfer progression.
Data Transmission
__
Data Transmission
please wait...
----status line-----
After a successful data transfer the data memory is deleted by MTWin and the
input mask from the standard program will be displayed.
The transferred records have the following data format:
.
