4
RADIO AUTO SCAN (SEARCH)
Press the
/PAIR
Button, the unit will conduct auto scan and search for the first available
channel. The u
nit will start to broadcast the station ‘P01’ after searching is finished.
Press the
10/FOLD./M.+
or
10/FOLD./M.-
Button to choose the next or previous programmed
station.
RADIO STATION MEMORY OPERATION
You can store up to 30 (FM) radio stations in the unit memory to listen to your favourite stations
directly and quickly. This prevents having to tune and search for the channels each time.
1. Rotate the
Tuning Dial to select the first desired station.
2. Press
PROG./MEM.
Button;
‘P01’ will flash on the Display. Press the
10/FOLD./M.+
or
10/FOLD./M.-
Button to choose the
position you want to store the channel (from ‘P01’ to
‘P30’), and then press the
PROG./MEM.
Button again to enter.
3. Search for another station and repeat steps (1) and (2). Repeat the process until you have
saved all desired stations. Up to 30 stations can be programmed.
4. Press the
10/FOLD./M.+
or
10/FOLD./M.-
Button to switch between the saved stations
directly.
CD OPERATION
PLAYBACK OF AUDIO DISCS
This system can playback all digital audio CDs including audio CD-Recordable (CD-R) discs,
audio CD-Rewritable (CD-RW) discs and CD-DA format digital audio CD/CD-R/CD-RW discs.
LOADING A DISC
1. Press the
MODE
Button
to select ‘CD’ mode.
2. Open the CD door,
‘OP’ will be shown on the Display.
3. Place an audio CD into the tray with the label side facing up.
4. Close the CD door. The Display initially shows a flashing
‘---‘ which then changes to the total
number of tracks. Playback will start from the first track.
5. To remove the CD, press
STOP ( )
Button to stop playback; then open the CD compartment
lid. Hold the CD by its edges, and take it out carefully.
Note:
1. Make sure play is stopped before opening the CD door.
2. To ensure good performance; wait until the unit completely reads the CD before starting play.
3. If no disc is loaded into the tray, or if the disc is unreadable, the Display will show
‘NO’.
PLAYING A DISC
1. Playback starts from track 1 automatically.
2. To pause playback, press
/ PAIR
Button. The current playing time and
‘PLAY’ will flash on
the Display.
3. To resume playback, press
/ PAIR
Button again.
4. To stop playback, press
STOP ( )
Button, the total number of tracks will show on the
Display.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
Press the
TUN.+/
or
TUN.- /
Button until the desired track appears on the Display. It will
start play automatically.
