5
b
c
BOSS
BOSS
c
c
a
a
a
PICK UP
SHORT LAND
HINGE, BATT
3. How to remove HLDR, BATT/PWB, MAIN
(1) Short the PICKUP Shortland.
(2) Remove the solders of HINGE, BATT and disconnect the 3 connectors (a).
(3) Remove the screw at b, 3 screws at c and then take out PWB, MAIN.
* Check that the 2 BOSS are inside the circuit board when assembling. Tighten the screw at b first.