Aiwa BBTU-300, User Manual

en

  12

13

USB MODE

PLAYING MUSIC VIA USB

This boombox has been developed using 
the latest technical advances in the USB 
field. However, given the wide range of USB 
storage device types that are currently in the 
market, we unfortunately cannot guarantee 
full compatibility with all of them. For this 
reason, in rare cases, there may be problems 
playing files from some USB storage devices. 
This is not due to device malfunction.

1. 

Slide the 

MODE 

switch to the 

CD-USB-

BT-AUX 

position to turn on the unit.

2. 

Press and hold the 

USB/BT/

 button 

until the “

USb

”,

 USB MODE INDICATOR

appears flashing on the left of the display.

3. 

Connect a USB storage device directly 

to the 

USB/MP3 

port. The display briefly 

shows the number of folders and then 
the total number of tracks. Playback will 
automatically start after a few seconds.

4. 

To temporarily stop playback, press the 

 button, and press it again to resume 

playback.

5. 

Press the 

 or 

 buttons to select a 

different track number

.

Press and hold the 

 or 

 buttons to find 

a specific passage within the track and 
release it at the point you want to listen to.

6. 

Press the   button to stop playing.

Notes:

• 

If the USB is not compatible, or there is 
no USB storage device connected, the 
display will show the word “NO”. 

• 

Because some storage devices have a 
large capacity, USB access time is a little 
longer.

• 

If the playlist reaches the maximum 
number of tracks the display will show 
the word 

"FUL" 

(FULL)

.

• 

Switch the device to a different operating 
mode before you remove the USB storage 
device.

• 

To avoid damaging the boombox or other 
devices, do not try to charge any external 
device using the USB port.

CREATING A USB PLAYLIST

The Program feature may be used to program 
up to 99 tracks for the USB mode too, in a 
programmable playlist.

1. 

While in stop mode only (no USB playback), 

press 

PROG

, and the LCD display will show 

the wording

 “P01”

 and the 

“

PROGRAM

”

indicator.

2. 

Press the 

 or 

 buttons to allocate the

desired track.

3. 

Press the 

PROG

 button to select and store 

the track into the memory. 
The program sequence will change to 

“P02”

 to choose the next track.

4. 

Repeat steps 2 and 3 to select up to 99 tracks. 

Once the last track has been added, the 
LCD display will automatically show the 
programmed tracks one by one, starting 
with the first one that was programmed.
If you want to create a playlist with less 
than 99 tracks, press twice the 

PROG

button after confirming your last track.

5. 

To play the selected tracks (in the program 
mode), press the 

 button.

6. 

Press the 

 button to hear the previous

programmed track or press 

 to hear the 

next programmed track.

7. 

To clear the programmed tracks from the 

memory, press the   button twice or change 
to another function mode.

LISTEN TO YOUR TRACKS REPEATEDLY

Press the 

REPEAT

 button on the front panel 

repeatedly to activate the 

REPEAT FUNCTIONS

in the following order:

1.

*FLASHING

(repeat the current track)

2.

FOLDER

(repeat all the tracks of 

the current USB folder)

3.

(repeat all the available tracks)

4.

RANDOM

(play randomly all the tracks

in the USB)

5.

OFF

(cancel the repeat/random function)

BLUETOOTH

 MODE

BLUETOOTH

 PAIRING

Prior to using the 

Bluetooth

 function, your boombox should be paired first with your 

Bluetooth

device. 

(“Pairing” means establishing connection between Bluetooth devices such as mobile phones, 

tablets, pc, etc).

1. 

Slide the 

MODE 

switch to the 

CD-USB-BT-

AUX 

position.

(fig. 1)

2. 

Press and hold the 

USB/BT/

 button 

until the “

bt

”

(Bluetooth)

 function mode 

appears on the display. 

(fig. 2)

3.

In 

Bluetooth

 mode, a voice prompt will 

announce 

Bluetooth

 pairing mode. 

The 

BLUETOOTH

 MODE LED INDICATOR

will start flashing in blue.

And the boombox will search automatically 
for 

Bluetooth

 devices.

4. 

Turn on the

 Bluetooth 

function on your 

device and make it visible (see your 
device's instructions to add or setup a 

Bluetooth 

device). 

5. 

Search for

 Bluetooth

 devices and select 

AIWA BBTU-300

Enter the code 

“0000”

 if needed.

(fig. 3)

If the devices are paired successfully, the 

BLUETOOTH

 MODE LED INDICATOR

 will 

keep bright, and a prompt voice will notify 
that the 

Bluetooth

 device is connected.

Having paired successfully, the device will 
connect automatically next time.

6. 

Press and hold 

PAIR

 to disconnect the 

currently paired 

Bluetooth

 device.

(fig. 4)

PLAY FROM A 

BLUETOOTH

 DEVICE

1. 

Press the 

 button to play.

2. 

To pause or resume play, press the 

button again.

3. 

Press the 

 or 

 buttons to select a 

different track number.