27
CX-BK7
[COLD RESET]
•
The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning
the set to the customer.
Procedure:
1. Press the three buttons
x
,
[ENTER]
, and
[FUNCTION]
simultaneously.
2. The fluorescent indicator tube becomes blank for a while, and
the set is reset, then becomes demonstration mode.
[VERSION DISPLAY]
•
This mode is used to check the model and software version.
Procedure:
1. Press the
I/
1
button to turn the power ON.
2. Press two buttons of
x
and
I/
1
simultaneously for five
seconds. The model name is displayed, then the software
version is displayed.
[LCD TEST]
•
This mode is used to check the liquid crystal display.
Procedure:
1. Press three buttons of
x
,
[MODE]
, and
[FUNCTION]
simultaneously.
2. All segments of liquid crystal display are turned ON.
3. To release from this mode, press the
I/
1
button.
[TUNER TEST]
•
This mode is used to check the change of frequency.
Procedure:
1. Press three buttons of
x
,
[MODE]
, and
[TUNER/BAND]
simultaneously.
2. The message “TUN TEST” is displayed on the liquid crystal
display.
3. Each time
Y
button is pressed, the display changes preset
FM frequency.
4. Press the
[TUNER/BAND]
button to set AM.
5. Each time
Y
button is pressed, the display changes preset
AM frequency.
[AMP TEST]
•
This mode is used to check the function of the amplifier.
Procedure:
1. Press three buttons of
x
,
[MODE]
, and
[i-Bass]
simultaneously.
2. The message “AMP TEST” is displayed on the liquid crystal
display.
3. When the
[VOLUME]
knob is turned clockwise, the message
“VOLUME MAX” is displayed on the liquid crystal display.
When the
[VOLUME]
knob is turned counterclockwise. The
message “VOLUME 0” is displayed on the liquid crystal
display.
4. Each time the
[BASE]
or
[TREBLE/MIDDLE]
knob is turned,
the message “EQ MAX”, “EQ MIN” or “EQ FLAT” is
displayed in this order on the liquid crystal display.
[USB TEST]
•
This mode is used to display the status of comunication.
Procedure:
1. Press the
I/
1
button to turn the power ON.
2. Press the
[FUNCTION]
button to select “USB”.
3. Press three buttons of
x
,
[PLAY MODE]
, and
[i-Bass]
simultaneously.
4. The message “WINAMP3” is displayed on the liquid crystal
display at first.
[ROBBERY PREVENTION LOCK]
•
This mode is used to unable to take sample disc out of set in the
shop.
Procedure:
1. Press the
I/
1
button to turn the power ON.
2. Press the
[FUNCTION]
button to select “DVD”.
3. Press two buttons of
[ENTER]
and
Z
simultaneously for five
seconds.
4. The message “LOCKED” is displayed on the liquid crystal
display and the disc is locked. (Even if pressing the
Z
button,
the message “LOCKED” is displayed on the liquid crystal
display and the disc is locked)
5. To release from this mode, press two buttons of
[ENTER]
and
Z
simultaneously for five seconds again.
6. The message “UNLOCKED” is displayed on the liquid crystal
display and the disc is unlocked.
[SHIP MODE]
•
This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press the
I/
1
button to turn the power ON.
2. Press the
[FUNCTION]
button to select “DVD”.
3. Press the
x
button for five seconds.
4. The message “MECHA LOCK” is displayed on the liquid crystal
display and the ship mode is set, then becomes power off.
[DECK TEST]
•
This mode is used to check the tape deck operation.
Procedure:
1. Press the
I/
1
button to turn the power ON.
2. Press three buttons of
z
,
[MODE]
, and
[FUNCTION]
simultaneously.
3. The message “TC TEST” is displayed on the liquid crystal
display.
4. Press the
z
button to start recording.
5. When the
x
button is pressed during recording, the tape is
rewound back to the beginning of recording, then playback starts.
[REPEAT 5 TIMES CANCEL]
•
The number of repeat for DVD playback is 5 times when the
repeat mode is “REPEAT”. This mode enables DVD to repeat
playback for limitless times.
Procedure:
1. Press the
I/
1
button to turn the power ON.
2. Press the
[FUNCTION]
button to select “DVD”.
3. Press three buttons of
x
,
[PLAY MODE]
, and
[FUNCTION]
simultaneously.
4. Repeat 5 times limit is canceled.
[AM STEP CHANGE-OVER]
(Except Saudi Arabia model)
• A step of AM channels can be changed over between 9 kHz and
10 kHz.
Procedure:
1. Press the
I/
1
button to turn the power ON.
2. Press the
[FUNCTION]
button to select “TUNER”.
3. Press two buttons of
[TUNER/BAND]
and
I/
1
simultaneously.
SECTION 5
TEST MODE
