33
CX-BK7
2-3. Track/Layer Jump
Track/Layer Jump
1. 1Tj
FWD
2. 1Tj
REV
3.500Tj Fine
FWD
4.500Tj Fine
REV
5.10kTj Dirc
FWD
6.10kTj Dirc
REV
7.20kTj Dirc
FWD
8.20kTj Dirc
REV
0. All Servo Off
Exit: RETURN
On this screen, track jump, etc. can be performed. Only for the DVD
dual layer disc, the focus jump and layer jump are displayed in the
right field
[1]
1Tj FWD
: 1 track jump forward.
[2]
1Tj REV
: 1 track jump reverse.
[3]
500Tj FWD : 500 track jump (fine search)forward.
[4]
500Tj REV : 500 track jump (fine search) reverse.
[5]
10kTj FWD : 10k track jump (direct search) forward.
[6]
10kTj REV : 10k track jump (direct search) reverse.
[7]
20kTj FWD : 20k track jump (direct search) forward.
[8]
20kTj REV : 20k track jump (direct search) reverse.
[10/0]
: All servo off.
2-4. Non EEPROM Write Adjust
Non EEPROM Write Adjust
1. Focus Offset
2. Focus Gain
3. Trk.
Offset Coarse
4. Trk.
Offset Fine
5. Trk.
Gain
6. EQ
Boost
0.All Servo Off
Exit: RETURN
On this screen, each item can be adjusted automatically. Select the
desired number
[1]
to
[10/0]
from the remote commander, and
current setting for the selected item will be displayed, then increase
or decrease numeric value with the
O
key or
o
key. If CLV has
been applied, the jitter is displayed for reference for the adjustment.
[1]
Focus Offset
: Adjusts focus offset.
[2]
Focus Gain
: Adjusts focus gain.
[3]
TRK. Offset Coarse : Adjusts tracking offset of the RF
amplifier (IC001) side.
[4]
TRK. Offset Fine
: Adjusts tracking offset of the DSP
(IC401) side.
[5]
TRK. Gain
: Adjusts track gain.
[6]
EQ Boost
: Adjusts amount of boost of
equalizer.
[10/0]
: All servo off.
2-5. EEPROM Write Adjust
EEPROM Write Adjust
1. Focus
Offset
2. Focus
Gain
3. Trk.
Offset Coarse
4. ------------
5. Trk.
Gain
6. EQ
Boost
0.All Servo Off
Exit: RETURN
On this screen, each item can be adjusted automatically. Select the
desired number
[1]
to
[10/0]
from the remote commander, and
selected item is adjusted automatically. Thus value is stored in the
EEPROM.
[1]
Focus Offset
: Adjusts focus offset.
[2]
Focus Gain
: Adjusts focus gain.
[3]
TRK. Offset Coarse : Adjusts tracking offset of the RF
amplifier (IC001) side.
[5]
TRK. Gain
: Adjusts track gain.
[6]
EQ Boost
: Adjusts amount of boost of
equalizer.
[10/0]
: All servo off.
2-6. Memory Check
Display images are shown as follows, and all two screens are able
to switch by the
O
key (UP) or
o
key (DW).
EEPROM Data 1/2
CD
SL
L0
L1
Focus
Gain
xx
xx
xx
xx
Trk.
Gain
xx
xx
xx
xx
Focus
Offset
xx
xx
xx
xx
Trk.
Offset
xx
xx
xx
xx
EQ.
Boost
xx
xx
xx
xx
PI
Level
xx
xx
--
--
Fcs. Balance
--
xx
--
--
Jitter
xx
xx
xx
xx
Mirror Time
xx
xx
xx
--
FE Level
--
xx
--
--
Traverse Lv1.
--
xx
--
--
Next:DW Default:CLR
Exit:RET
EEPROM Data 2/2
CDRW DVDRW
Focus
Gain
xx
xx
Trk.
Gain
xx
xx
Focus
Offset
xx
xx
Trk.
Offset
xx
xx
EQ.
Boost
xx
xx
Prev:UP Default:CLR
Exit:RET
On this screen, current servo adjusted data stored in the EEPROM
are displayed. The adjusted data are initialized by pressing the
[CLEAR]
key, but be careful that they are not recoverable after
initialization.
Before clearing the adjusted data, make a note of the set data.
