16
En
Programmed Edit Recording
As you program the CD tracks to record, Programmed Edit
Recording displays the remaining recording time for each side
of the tape, so you can easily select a set of desired tracks
within the length of your tape.
1
Insert the recording tape in DECK 2.
2
Press CD to select the CD function and load the
disc.
3
Press CD EDIT/CHECK (SHIFT+CD EDIT/CHECK
on the remote control) twice.
The "
PRGM
" and "
EDIT
" indicators light up and
"
PRGMC-00
" appears on the display.
4
Press the numbered buttons on the remote
control to enter the length of the recording tape.
10 to 99 minutes can be specified.
•
f
,
g
or MULTI JOG can also be used to specify
tape length.
5
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press the numbered buttons on the remote
control to select the first track to be recorded on
side A.
-To select the 25th track, press +10, +10 and 5.
-To select the 10th track, press +10 and 0.
6
Repeat step 5 to select the rest of the tracks for
side A.
The remaining recording time of side A is displayed. You
cannot select a track with a longer playing time.
7
Press CD EDIT/CHECK to switch to side B and
select the tracks for the side.
Side A
Tab for side A
8
Press CD EDIT/CHECK to switch back to side A
and press
w
REC/REC MUTE to start recording
on side A.
The tape is rewound to the beginning of side A and
recording starts.
Go to the next step when recording on side A finishes.
9
Press CD EDIT/CHECK to switch to side B, turn
over the tape, and press
w
REC/REC MUTE to
start recording on side B.
•You cannot program more than 30 tracks. "
FULL
" is
displayed.
•You cannot program a track with a track number larger than
30.
•Recording cannot start from a point halfway in the tape.
To stop recording
Press
s
. Recording and CD playback stop simultaneously.
To check the program
1 Before recording, press CD EDIT/CHECK to select side A or
B.
2 Press
f
or
g
repeatedly. The track number and
program number are displayed in succession.
To change the program of each side
Press CD EDIT/CHECK to select side A or B, and press
s
CLEAR to clear the program for the selected side. Then,
select tracks again.
To clear the edit program
Press
s
CLEAR twice so that "
EDIT
" disappears from the
display.
To prevent accidental erasure
Break off the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.
