5
ENGLISH
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to the FM 75
Ω
terminals.
To connect other optional equipment
➞
page 24.
REMOTE CONTROL
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
• If the unit is not going to be used for an extended period of
time, remove the batteries to prevent possible electrolyte
leakage.
• The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
BEFORE OPERATION
CONTROL STAGE
There is a retractable stage with control buttons on the amplifier.
To open the control stage
Press the OPEN/CLOSE button.
With the power off, pressing the OPEN/CLOSE button enables
the unit to turn on, and the control stage to open.
To close the control stage
Press the OPEN/CLOSE button.
To turn the unit on
Press one of the function buttons (TAPE, TUNER, CD, VIDEO 1/
MD, VIDEO 2/AUX).
Playback of the inserted disc or tape begins, or the previously
tuned station is received (Direct Play Function).
The POWER button is also available.
The disc compartment may open and close to reset the unit.
