ENGLISH
Using One-Touch Playback after ShowView system (page
15) or timer recording (page 17) is convenient. You can
make timer recordings and play back only the portion you
just recorded with the timer by pressing a single button later.
Stop recording (when recording without timer.)
The ONE-TOUCH PLAYBACK button on the VCR lights.
If another operation button is pressed after you stop
recording, One-Touch Playback will be canceled.
Press ONE-TOUCH PLAYBACK on the VCR or
OTPB on the remote control.
The tape rewinds to the start of the recorded portion and
begins playback.
When you set the timer for more than two
timer programs
The VCR starts playing back from the earliest one when you
use One-Touch Playback.
To find the beginning of the second (or later) program, use
Index Search (page 12).
Note
One-Touch Playback does not work for recordings of less than
30 seconds.
1
2
Playing back the portion you just
recorded – One-Touch Playback
14
CONTINUE
Recording with One–Touch
Recording
You can immediately start recording the current channel for
a specified time with One-Touch Recording.
1
2
POWER
s
STOP
a
PAUSE/STILL
w
REC/OTR
VCR
REM BILSAP
ST
LP EP
M
Hi-Fi
TIMER
SP
REC
Before setting the Recording
• Turn on the VCR and TV and set the TV for VCR
reception.
• Insert a cassette with its erasure prevention tab in place.
Make sure the tape is longer than the recording time.
• Select the channel position to record.
Press
w
REC/OTR.
The VCR starts recording.
Press
w
REC/OTR repeatedly to set the
recording duration.
Each press changes the recording duration in the display
window and on the TV screen in the following way:
0H30
l
1H00
l
1H30
l
...
l
5H30
i
regular recording
j
6H00
j
The recording time indicator in the display window
counts down to “0H00.”
The recording stops at “0H00” and the VCR turns off.
POWER
X
PAUSE/STILL
w
REC/OTR
Z
STOP/EJECT
