ENGLISH
20
1
2
Setting the VCR channels
manually
You must set the VCR channels manually for recording TV
programs, if Auto Tuning does not set them correctly.
OTHER FUNCTIONS
Enter the VCR channel number of TV station
you want to tune using the number buttons.
• You can also select the VCR channel number using
i+
or
k-
.
• If the TV station is received, the VCR displays the TV
program.
Press i/MENU to display the VCR channel table.
To set the other VCR channel, press
i+
or
k-
to select the channel position, then press OK/
CLK/CNT to return to the screen in step 4. And
repeat steps 4 through 6 until all required VCR
channels are set.
Press i/MENU to return to the normal screen.
If you cannot get a clear picture
In step 5, press
l
to highlight MFT, then press
i+
or
k-
repeatedly until the clear picture is obtained.
Tips
• To start Auto Scan, press and hold
i+
or
k-
for more
than 4 seconds in step 5.
• To erase the channel, press
i+
or
k-
to select the TV
station you want to erase on the VCR channel table after
step 6, then press
j
to erase.
3
5
6
7
8
i/MENU
OK/CLK/CNT
Number
buttons
AV
j
/
l
i+
/
k-
4
Select the channel position using the number
buttons.
Press i/MENU.
Press
j
or
l
to select PR SET, then press
OK/CLK/CNT.
Press AV to select the normal TV station or
cable TV, the press OK/CLK/CNT.
If you receive the program from VHF/UHF antenna,
press AV to display “C--” below CH.
If you receive cable TV program, press AV to display
“S--” below CH.
0 1
C 0 6
+ 1 5
P R - 0 1
0 2
C 2 0
+ 4 7
P R - 0 2
0 3
C 2 3
+ 3 1
P R - 0 3
0 4
C 2 8
+ 4 7
P R - 0 4
0 5
C 4 0
+ 1 0
P R - 0 5
0 6
C 5 0
C 2 7
+ 3 1
P R - 0 6
P R - 0 7
0 7
0 8
– –
0 0
– –
– – – – –
,
:
:
MOVE
DELETE
CONTINUE
REC
TIME
DATE
SYS-
TEM
OSD
OPR
ON
OFF
f
OSD
PR
CH
MFT S T A T I O N
CHANNEL / CABLE : AV
0 7
C – –
– –
– – – – –
PR
CH
MFT S T A T I O N
CHANNEL / CABLE : AV
0 7
C 2 7
0 0
