background image

ENGLISH

ENTREE

ANTENNE

SORTIE

ANTENNE

AERIAL

RF.OUT

EURO AV1
  AUDIO/ 
  VIDEO

Connecting the VCR

Basic connections

PREPARATION

1

2

3

3

2

4

To AC outlet

Antenna cable
(supplied)

TV

Antenna cable
(not supplied)

Satellite receiver

Cable box

or

or

1

To enjoy the sound and picture from the VCR (VCR mode)

Press TV/VCR to display “VCR” in the display window. The VCR automatically switches to VCR mode when playback is started.

To watch a program on the TV while recording another program on the VCR (TV mode)

Select the program to be watched using the TV’s tuner. The sound and picture of the channel selected for recording are
received by the VCR.

VCR

TV

During power on

VCR mode

AV input selected

TV mode

Input from TV’s tuner

During power off

           –

Input from TV’s tuner

When the VCR is set to TV mode and the PAY-TV channel is

selected, the signals are scrambled even when PAY-TV is selected
by the TV’s tuner. In this case, either set the VCR to VCR mode or
switch the TV’s input signals to AV input.

3

To 21-pin scart
cable connector

4

Disconnect the antenna cable from your TV and connect it to the
AERIAL connector on this VCR.

Connect the supplied antenna cable to the RF OUT connector on
the VCR and the antenna connector on your TV.

Connect the optional 21-pin scart cable to the EURO AV1/AUDIO/
VIDEO connector on the VCR and the 21-pin scart cable
connector on your TV.

This connection is recommended as an easier way to set-up the VCR, and
improves the picture and sound quality.
If you do not use this connection, go to the next step.

Connect the AC cord to the AC outlet.

21-pin scart cable
(not supplied)

Caution

All connections should be made with both the VCR and your TV unplugged from the AC outlet.

Notes

• If your TV has more than one 21-pin scart cable connector, please refer to TV operating instructions.
• If you do not have house hold antenna socket or you are uncertain of it, you should seek the advice of a local antenna dealer.
• If you connect the VCR with to a cable box or satellite receiver, please refer to the operating instructions of those appliances.

To antenna connector

Summary of Contents for HV-GX935Z

































Reviews: