background image

 !

=  !  SAFTY PARTS

C

= Components marked

All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.

UNIT-NAME                           !  C  REF-NO    PARTS-NO              PARTS-NAME                                             SUFFIX&MODEL

-10-

                                                                               HV-MC90
                                                                               KEJC
MAIN                   S IC 501  SI-MCR-NE0-07B IC,UPD784927GF-214-3BA         A
MAIN                   S IC 502  SI-LNR-SA0-02A IC,LB11880                     A
MAIN                   O IC 504  SI-KE7-031-00A IC,KIA7031P                    A
MAIN                   X J  301  S8-740-00T-000 WIRE,COPPER 0.6 ROLL           A
MAIN                   O JK 3M1  S7-204-2A0-000 JACK,PIN (4PIN)                A
MAIN                 ! O L  102  S6-161-45H-000 FILTER SHT LFS2020V4-04350     A
MAIN                   O L  103  S6-330-88G-000 COIL,CHOCK TP 5MM              A
MAIN                   O L  104  S6-330-88G-000 COIL,CHOCK TP 5MM              A
MAIN                   O L  301  87-005-208-080 COIL,100                       A
MAIN                   O L  303  87-A50-002-080 COIL,270U 2.3-3.4-5            A

MAIN                   O L  304  SL-R10-00J-0N5 COIL,100UH                     A
MAIN                   O L  306  87-003-282-080 COIL,12 2.3-3.4-5              A
MAIN                   O L  310  SL-R10-00J-0N5 COIL,100UH                     A
MAIN                   O L  311  87-003-152-080 INDUCTOR,100M 2.3-3.4-5        A
MAIN                   O L  3M1  87-003-152-080 INDUCTOR,100M 2.3-3.4-5        A
MAIN                   O L  3M2  87-003-152-080 INDUCTOR,100M 2.3-3.4-5        A
MAIN                   O L  3M3  SL-R10-00J-0N5 COIL,100UH                     A
MAIN                   O L  3M4  SL-R10-00J-0N5 COIL,100UH                     A
MAIN                   O L  3M5  SL-R10-00J-0N5 COIL,100UH                     A
MAIN                   O L  501  87-005-208-080 COIL,100                       A

                                                                               HV-MC90
                                                                               KEJC
MAIN                   X L  502  S8-740-00T-000 WIRE,COPPER 0.6 ROLL           A
MAIN                   O L  503  SL-R56-00K-035 COIL,560M                      A
MAIN                   O LD 501  S9-31R-001-7C0 HOLDER ASSY LED(DI-CKD)LOCAL   A
MAIN                   O LED502  S3-01R-2U0-01A LED ASSY,TOH-30M05G1           A
MAIN                   O MD 3M1  S7-04R-P00-2B0 MODULATOR,RUMP73655VL          A
MAIN                   O MS 501  S6-00R-PY0-01B SW,MMS00420ZMBO MIC            A
MAIN                   O P  3D01 S5-612-34Z-000 CONN,3P                        A
MAIN                   O P  3D02 S6-30R-5S0-10A CONN,6P                        A
MAIN                   O P  3D03 S5-612-51B-000 GB201-2P-TS-B(LGC)  P          A
MAIN                   O PMC01   S6-30R-2P0-05C CONN,TMC-J08P-A1 8PIN 2MM      A

MAIN                   O PMD01   S5-612-34V-000 GF120-07S-TS LGC 7P SP         A
MAIN                   O PML01   S6-30R-2S0-11A CONN,2P                        A
MAIN                 ! O PW 101  S5-612-92B-000 GP390 LGC 3P STRAIG  P         A
MAIN                   S Q  152  ST-R22-030-9AF TR,SRA2203                     A
MAIN                   S Q  153  ST-R32-050-9AB TR,KTC3205-TP-Y                A
MAIN                   O Q  155  ST-R12-730-9AA TR,KTA1273-TP-Y                A
MAIN                   O Q  156  ST-R53-430-9BA TR,2SC5343-L                   A
MAIN                   O Q  301  ST-R53-440-9AA TR,2SC5344Y                    A
MAIN                   O Q  302  ST-R12-730-9AA TR,KTA1273-TP-Y                A
MAIN                   S Q  303  ST-R12-030-9AE TR,SRC1203                     A

                                                                               HV-MC90
                                                                               KEJC
MAIN                   O Q  304  ST-R19-800-9CA TR,2SA1980G                    A
MAIN                   O Q  305  ST-R53-430-9BA TR,2SC5343-L                   A
MAIN                   O Q  306  ST-R53-430-9BA TR,2SC5343-L                   A
MAIN                   S Q  307  ST-R22-030-9AF TR,SRA2203                     A
MAIN                   O Q  3M1  ST-R19-800-9CA TR,2SA1980G                    A
MAIN                   S Q  514  ST-R12-030-9AE TR,SRC1203                     A
MAIN                   S Q  515  ST-R12-030-9AE TR,SRC1203                     A
MAIN                 ! O R  101  S6-140-07A-000 RES,CEM 2.7/2W                 A
MAIN                   X R  102  SR-D68-03F-608 RES,680K-1/6W                  A
MAIN                   X R  103  SR-D04-72F-608 RES,47-1/6W                    A

MAIN                   X R  104  SR-S56-02K-619 RES,56K-2W                     A
MAIN                   X R  106  SR-D68-03F-608 RES,680K-1/6W                  A
MAIN                   O R  109  SR-S03-50K-619 RES,0.35-2W                    A
MAIN                   X R  116  SR-D22-00F-608 RES,220-1/6W                   A
MAIN                   X R  117  SR-D39-01F-608 RES,3.9K-1/6W                  A
MAIN                   X R  118  SR-D10-01F-608 RES,1.0K-1/6W                  A
MAIN                   X R  119  SR-N33-01F-408 RES,3.3K-1/6W                  A
MAIN                   X R  120  SR-N27-01F-408 RES,2.70K-1/6W                 A
MAIN                   X R  121  SR-D18-00F-608 RES,180-1/6W                   A
MAIN                   X R  125  SR-D56-01F-608 RES,5.6K-1/6W                  A

                                                                               HV-MC90
                                                                               KEJC
MAIN                   X R  126  SR-D68-00F-608 RES,680-1/6W                   A
MAIN                   X R  153  SR-D18-01F-608 RES,1.8K-1/6W                  A
MAIN                   X R  156  SR-D10-01F-608 RES,1.0K-1/6W                  A
MAIN                   X R  157  SR-D47-00F-608 RES,470-1/6W                   A
MAIN                   X R  159  SR-D47-02F-608 RES,47K-1/6W                   A
MAIN                   X R  15T1 SR-D22-01F-608 RES,2.2K-1/6W                  A
MAIN                   X R  161  SR-D47-01F-608 RES,4.7K-1/6W                  A
MAIN                   X R  301  SR-D33-03F-608 RES,330K-1/6W                  A
MAIN                   X R  302  SR-D12-02F-608 RES,12K-1/6W                   A
MAIN                   X R  303  SR-D18-00F-608 RES,180-1/6W                   A

MAIN                   X R  304  SR-D27-02F-608 RES,27K-1/6W                   A
MAIN                   X R  305  SR-D18-02F-608 RES,18K-1/6W                   A
MAIN                   X R  306  SR-D22-01F-608 RES,2.2K-1/6W                  A
MAIN                   X R  308  SR-D04-72F-608 RES,47-1/6W                    A
MAIN                   X R  309  SR-D15-01F-608 RES,1.5K-1/6W                  A
MAIN                   X R  310  SR-D27-01F-608 RES,2.7K-1/6W                  A
MAIN                   X R  311  SR-D47-01F-608 RES,4.7K-1/6W                  A
MAIN                   X R  312  SR-D47-02F-608 RES,47K-1/6W                   A
MAIN                   X R  313  SR-D12-02F-608 RES,12K-1/6W                   A
MAIN                   X R  314  SR-D47-01F-608 RES,4.7K-1/6W                  A

ELECTRICAL PARTS LIST - 3/8

Summary of Contents for HV-MC90






















































































Reviews: