background image

10

En

This unit plays back finalized CD-R/RW discs as well as audio
CDs.

Playback

1

Press CD and load disc(s).

Press 

z

OPEN/CLOSE to open the disc compartment and

place one or two disc(s) with the labelled side up.
To place three discs, press DISC CHANGE so that the trays
rotate, then place the third one. Lastly, close the
compartment with 

z

OPEN/CLOSE.

•When loading an 8-cm (3-inch) disc, place it on the

inner circle of the tray.

2

To play all discs, press 

c

(

c

/

d

on the

remote), then 

"ALL DISCS"

  lights up in the

display.
To play one desired disc, press DISC DIRECT
PLAY 1-3, then 

"1 DISC"

 lights up in the display.

A playing disc indicator flashes in the display.

To stop playback

Press 

s

.

CD OPERATIONS

To pause playback

Press 

a

. Press again to resume playback.

To select a track

Turn MULTI JOG or press 

r

  or 

t

  on the remote

repeatedly.
With the numbered buttons on the remote,
- To select track 10, press 0/10.
- To select track 20, press +10, +10 and 0/10.
- To select track 25, press +10, +10 and 5.

To search (playback in fast forward or fast reverse)

Hold down 

f

 or 

g

. Release at the desired point.

To select a disc

Press DISC DIRECT PLAY 1-3 or DISC SKIP on the remote.

To display the remaining time of the track or the disc

Press DISPLAY repeatedly during playback.
The display changes cyclically as follows:

Track number and elapsed playing time  of the current track
Track number and remaining time of the current track
Remaining time of the current disc
Clock display (for 6 seconds)

To  replace disc(s) during playback without
interruption

While one disc is being played back, press DISC CHANGE so
that the compartment opens, replace disc(s) with other one(s),
and press DISC CHANGE to close the compartment.

Repeat playback

Plays all the tracks or one track on the discs repeatedly.

1

Press MODE repeatedly until "

REPEAT?

" appears

in the display and then press ENTER.

2

Turn MULTI JOG to select one of the two repeat
modes as below or "

REPEAT OFF

", and then

press ENTER.

- "

REPEAT ALL

":

For all the tracks on one desired disc or all discs up to
5 times. "

"

" lights up.

- "

REPEAT 1

":

For a single track only. "

"

1

" lights up.

If there is no MULTI JOG or button operation within 6
seconds, the setting is canceled.

3

To play one desired disc, press DISC DIRECT
PLAY 1-3.
To play all discs, press 

c

(

c

/

d

on the

remote).

On the remote, press REPEAT repeatedly until "

"

" or "

"

1

"

appears and carry out step 3.

To cancel repeat playback

Carry out step 1 and 2, and select "

REPEAT OFF

" in step 2.

On the remote, press REPEAT repeatedly until  "

"

" and

"

"

1

" disappear.

DISC DIRECT

PLAY 1-3

MODE

DISC CHANGE

ENTER

MULTI JOG

CD

OPEN/CLOSE

PLAY MODE

DISPLAY

REPEAT

1–0/10,
+10

DISC SKIP

CLEAR

DISPLAY

Summary of Contents for JAX-E3



























Reviews: