CD/MP3
–
Pla
y
13
GB
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 19).
MP3 audio tracks cannot be played on JAX-
N44/S44.
1
Press CD (or FUNCTION repeatedly) to
switch the function to CD.
2
Press PLAY MODE repeatedly in stop
mode until “PGM” appears.
3
Press DISC SKIP (or DISC 1 – 3 or DISC
SKIP/EX-CHANGE on the unit) to select
a disc.
4
Press
.
or
>
repeatedly (or turn
AMS operation dial on the unit) until
the desired track number appears.
When programming the MP3 audio tracks,
press ALBUM – or + to select album, then
press
.
or
>
repeatedly (or turn AMS
operation dial on the unit) until the desired
track number appears.
5
Press ENTER.
The track is programmed.
The program step number appears,
followed by the total playing time.
6
Program additional tracks.
7
Press
N
.
Program Play starts.
Other Operations
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD
(or FUNCTION repeatedly) to switch the function to
CD, then press
N
. However, the program is cleared
when you open the disc tray.
• “– –.– –” appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 audio track.
Creating your own
program
— Program Play
Selected track number
Disc tray number
Total playing time (including
selected track)
To program
Repeat steps
Other tracks on the
same disc
4 and 5
Other tracks on
other discs
3 to 5
To
Do this
Cancel Program
Play
Press PLAY MODE repeatedly
in stop mode until “PGM”
disappears.
Clear a track from
the end
Press CLEAR in stop mode.