20
GB
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 3 and 4,
perform steps 2 to 6 of “Creating your own
program” (page 13).
Tip
For JAX-N88/N77/N66/N33/PK88/PK77/PK66, if you
select both sides recording and the tape reaches the end
of the front side part-way through a track, the entire track
is recorded again from the beginning of the reverse side.
You can record just the portions you like from a
CD, tape or radio program on a tape.
You can also record from connected
components (see “Hooking up optional
components” on page 27).
Use buttons on the unit for the operation.
1
Load a recordable tape into deck B,
then press TAPE A/B repeatedly to
select deck B.
2
(JAX-N88/N77/N66/N33/PK88/PK77/
PK66 only)
Press PLAY MODE repeatedly to select
“
g
” to record on one side. Select
“
j
” (or “RELAY”) to record on both
sides.
When you want to record from the reverse
side, press
hH
twice or until the TAPE
B reverse side indicator lights up. Then
press
x
.
3
Press one of the following buttons to
select the desired source to record.
• CD: To record from this system’s CD
player.
• TAPE A/B: To record from this system’s
tape deck A.
• TUNER/BAND: To record from this
system’s tuner.
• VIDEO/MD: To record from the
connected VCR or MD deck to VIDEO/
MD IN jacks.
4
Press REC PAUSE/START.
Deck B stands by for recording.
“REC” flashes.
5
Press REC PAUSE/START, then start
playing the desired source to record.
Recording starts.
Recording on a tape
manually
— Manual Recording