4
En
Connection
Plug in the AC power cord to the AC power outlet after all other
connections are made.
1
Connect the front speakers.
Connect the right front speaker (marked "R" on the rear
side) to the SPEAKERS R terminals and place it on the
right side of the unit. Connect the left (marked "L" on the
rear side) to the SPEAKERS L terminals and place it on
the left side.The speaker cords with the white stripes go
to the
0
terminals.
PREPARATIONS
2
Connect the supplied antennas.
Strip off the insulation of the FM antenna with twisting
the cord.
Connect the FM antenna to the FM 75
Ω
terminal without
the
2
mark and the AM antenna to the AM LOOP
terminals.
3
Connect the AC power cord to an AC outlet.
When the AC power cord is connected to an AC outlet for
the first time, DEMO appears on the display.
To deactivate the DEMO, press DEMO/ECO.
•Do not short-circuit the
0
and
9
speaker cord leads.
•Do not leave objects generating magnetism or objects
affected by magnetism near the speakers.
Remote control
Detach the battery compartment lid at the rear of the remote
control and insert two R6 (size AA) batteries with correct
polarity.
• Replace the batteries with new ones when the operational
distance between the remote control and main unit becomes
shorter.
• Remove the batteries if the unit is not going to be used for
an extended period of time.
• The remote control may not operate if it is used under intense
sunlight, etc., or if its line of sight is obstructed.
AM antenna
FM antenna
