4
En
Connection
Plug in the AC power cord to the AC power outlet after all other
connections are made.
1
Connect the right front speaker.
1
Connect the speaker cords with the color of blue and black
to the SPEAKERS MAIN R terminals. The blue-colored
cord go to the
0
terminal.
2
Connect the cords with the color of red and black to the
SPEAKERS LOW FREQ R terminals. The red-colored cord
go to the
0
terminal.
2
Connect the left front speaker.
Connect the speaker cords to the L terminals in the same
manner as step 1.
PREPARATIONS
Remote control
Detach the battery compartment lid at the rear of the remote
control and insert two R6 (size AA) batteries with correct
polarity.
•Replace the batteries with new ones when the operational
distance between the remote control and main unit becomes
shorter.
•Remove the batteries if the unit is not going to be used for
an extended period of time.
•The remote control may not operate if it is used under intense
sunlight, etc., or if its line of sight is obstructed.
AM antenna
FM antenna
3
Connect the supplied antennas.
Strip off the insulation of the FM antenna with twisting
the cord.
Connect the FM antenna to the FM 75
Ω
terminal without
the
2
mark and the AM antenna to the AM LOOP
terminals.
4
Connect the AC power cord to an AC outlet.
When the AC power cord is connected to an AC outlet for
the first time, DEMO appears on the display.
To deactivate the DEMO, press
d
.
•Do not short-circuit the
0
and
9
speaker cord leads.
•Do not leave objects generating magnetism or objects
affected by magnetism near the speakers.
