8
En
ADJUSTMENTS BEFORE OPERATIONS
Power
Turning the unit on
Press POWER
6
STANDBY/ON (POWER on the remote
control).
Pressing TAPE, TUNER, VIDEO/AUX or CD also turns the unit
on (Direct Play Function.) When a disc or tape is inserted, the
playback will start automatically.
Turning the unit off
Press POWER
6
STANDBY/ON again.
The unit goes into standby.
DEMO
If the clock has not been set, a DEMO appears on the display
when the unit is turned off.
To deactivate and activate the DEMO
Press
d
when the unit is turned off.
Spectrum analyzer display
You can change the spectrum analyzer display.
Press DISPLAY on the remote control repeatedly to
select one of the three spectrum analyzer displays.
On the unit, press MODE repeatedly to display "
DISPLAY
",
and press ENTER within 4 seconds. Then turn MULTI JOG
within 6 seconds.
- NORMAL1: Displays the fluctuation from down side to up
side of the display
- NORMAL2: Displays the fluctuation from center to up and
down sides of the display
- BASS: Displays the fluctuation from left to right of the display
Volume
Turn VOLUME (Press VOLUME
+
,
-
on the remote
control).
Adjust from 0 (minimum) to 47 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 32 or more, it is
automatically turned down to 31 the next time the unit is turned
on.
