Aiwa NSX-TR99, Operating Instructions Manual

9

En

Dimmer

Adjusts the brightness of the display.

1

Press MODE repeatedly to display "

DIMMER

"

when the unit is turned on, and then press ENTER
within 4 seconds.

2

Turn MULTI JOG to select one of the three dimmer
modes or "

DIM-OFF

", and then press ENTER.

"

DIM-OFF

" is the brightest and "

DIMMER 3

" is the

dimmest.
If there is no MULTI JOG or button operation within 6
seconds, the setting is canceled.

To cancel the dimmer

Repeat the above and select "

DIM-OFF

".

Setting the clock

1

Press CLOCK on the remote control.

On the unit, press MODE repeatedly to display "

CLOCK

",

and then press ENTER within 4 seconds.

2

Press 

f

 or 

g

 to set the time.

Each press changes the time in 1-minute steps. Holding
it down changes the time in 10-minute steps.
If 

f

  or 

g

  is not pressed within 6 seconds, the

setting is canceled.
•MULTI JOG is also available in place of 

f

 or 

g

.

3

Press ENTER or 

a

SET.

The time display stops flashing and the clock starts from
00 seconds.

To display the time

Press CLOCK on the remote control.
The time will be displayed for 6 seconds, but it cannot be
displayed during recording.

To switch to the 24-hour standard

Display the time and press 

s

 within 6 seconds.

With each press, the clock alternates between the 12-hour
standard and the 24-hour standard.

Tip:

In the 12-hour standard, "

AM 12:00

" indicates midnight

and "

PM 12:00

" noon.

If the clock display flashes when the unit is turned
off

There has been a power interruption. Re-set the clock.

ECO mode

Reduces power consumption with the following operations, etc.

- The unit blacks out when the unit is turned off. Only the red

indicator lights up. (Only when the clock is set.)

- If dimmer mode is set to on, the unit illumination brightens

(for 10 seconds) only when you operate the unit.

1

Press MODE repeatedly to display "

ECO

", and

then press ENTER within 4 seconds.

2

Turn MULTI JOG to select 

"ECO ON"

 and then

press ENTER.

If there is no MULTI JOG or button operation within 6
seconds, the setting is canceled.

To cancel the ECO mode

Repeat the above and select "

ECO OFF

".