– 5 –
(3)
Eliminate twisting, etc. of the high-voltage cable and
arrange it so that no twisting occurs. (See Figure 3-3)
Caution :
If the cable is not arranged correctly, the anode
cap could turn and cause an installation defect.
(4)
Turn over the rubber cap symmetrically on the left and
right. (See Figure 3-4)
Caution :
Take great care not to damage the anode cap.
Figure 3-3
(5)
Fit your forefinger over the projection at the center of the
cap and hold the cap between your thumb and middle
finger. (See Figure 3-5)
High-voltage cable
Anode cap
Figure 3-4
Figure 3-5
