B1-1
1
2
UP TO
RELEASE
Front Cabinet
TV/VCR Block
1
1
Main PCB Holder
VCR Block
Main PCB
2
2
3
3
3
DISASSEMBLY INSTRUCTIONS
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
1.
2.
3.
4.
5.
Remove the 2 screws
1
.
Remove the 2 screws
2
.
Remove the 2 screws
3
which are used for holding the
Back Cabinet.
Remove the AC cord from the AC cord hook
4
.
Remove the Back Cabinet in the direction of arrow.
1-3: TV/VCR BLOCK (Refer to Fig. 1-3)
1.
2.
3.
4.
Remove the 2 screws
1
.
Disconnect the following connectors:
(CP351, CP755, CP354, CP401, CP501 and CP502).
Unlock the support
2
.
Remove the TV/VCR Block in the direction of arrow.
Fig. 1-3
1-4: MAIN PCB (Refer to Fig. 1-4)
1.
2.
3.
4.
5.
6.
Remove the screw
1
.
Remove the Main PCB Holder.
Remove the 2 screws
2
.
Remove the 3 screws
3
.
Disconnect the following connectors:
(CP810 and CP820).
Remove the Main PCB in the direction of arrow.
Fig. 1-1
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
Fig. 1-2
CRT PCB
Front Cabinet
Fig. 1-4
Front Cabinet
1
1
2
2
3
3
4
Back Cabinet
1.
2.
3.
Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
Disconnect the following connectors:
(CP801 and CP850).
Remove the CRT PCB in the direction of arrow.
