DISASSEMBLY INSTRUCTIONS
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
1.
2.
3.
Remove the 4 screws
1
.
Remove the 2 screws
2
.
Remove the Back Cabinet in the direction of arrow.
(B)
TV Block
CRT PCB
(A)
Fig. 1-2
Front Cabinet
1-3: VCR BLOCK (Refer to Fig. 1-3)
Remove the 2 screws
1
.
Unlock the support
2
.
Remove the VCR Block in the direction of arrow.
1.
2.
3.
VCR Block
Front Cabinet
2
1
1
Fig. 1-3
Front Cabinet
Back Cabinet
1
2
2
1
1
1
Fig. 1-1
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1-2: TV BLOCK (Refer to Fig. 1-2)
1.
2.
3.
4.
Remove the CRT PCB in the direction of arrow (A), then
unplug the following connector: (CP801 and CP850).
Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
Disconnect the following connectors:
(CP820, CP810, CP005, CP502 and CP503).
Slide out the TV Block in the direction of arrow (B).
The speaker cannot be removed before removing the
Earphone PCB.
B1-1
