Cam Pinch Roller
Cam P5
Arm P5 Ass'y
Cassette Opener
Pinch Roller
3
2
3
Polyslider Washer
5
Spring Cam Pinch
1
DISASSEMBLY INSTRUCTIONS
Reel Disk S
Reel Disk T
(A)
(A)
Fig. 2-8
PINCH ROLLER / CASSETTE OPENER
(Refer to Fig. 2-9)
2-9:
Cam Pinch Roller
Cam P5
Cam Gear
Fig. 2-9
Marker
2-10: AUDIO CONTROL HEAD (Refer to Fig. 2-10)
1.
2.
3.
4.
Disconnect the following connector: (CP4106) on the
Head Amp PCB.
Remove the 3 screws
1
.
Remove the 3 Audio Control Head Springs.
Remove the Audio Control Head.
Polyslider Washer
Polyslider Washer
NOTES
1.
2.
Do not touch the head by any means when replacing
the Audio Control Head. (Use gloves.)
After replacement, confirm the following adjustments.
a. MECHANICAL ADJUSTMENTS: ITEM 2-2
b. MECHANICAL ADJUSTMENTS: ITEM 2-3
1.
2.
3.
4.
5.
6.
7.
8.
NOTES
1.
2.
Do not touch the Pinch Roller. (Use gloves.)
When installing the Cam P5, Cam Pinch Roller and Cam
Gear, align the timing marks.
Unlock the support
1
.
Remove the Pinch Roller.
Remove the screw
2
.
Unlock the 2 supports
3
.
Remove the Cassette Opener.
Remove the Spring P5 and Arm P5 Ass'y.
Remove the Cam Gear, Polyslider Washer
4
, Spring
Cam Pinch and Cam Pinch Roller.
Remove the Polyslider Washer
5
and Cam P5.
Polyslider Washer
4
Cam Gear
Spring P5
B2-3
