-16-
CD MECHANISM DISASSEMBLY INSTRUCTIONS AND RE-ASSEMBLY INSTRUCTION -9/14
11.P/U UNIT
1) Remove the COVER 2. (Refer to “1. Remove the COVER 2”.)
2) Open the DRAWER. (Refer to “2. Open the DRAWER”.)
3) Remove the ASS’Y CRG from the CHASSIS. (Refer to “4. Remove the ASS’Y CRG from the CHASSIS”.)
4) Remove the ASS’Y CLAMPER. (Refer to “10. SWITCH4, SWITCH5 5)”.)
5) You can remove the four screws of the P/UUNIT in this state.
12.Remove the ARM STOPPER B, ASS’Y SLIDER 2 and SLIDER 1
1) Remove the COVER 2. (Refer to “1. Remove the COVER 2”.)
2) Remove the DRAWER. (Refer to “2. Open the DRAWER” and “3. Remove the DRAWER from mechanism”.)
3) Remove the ASS’Y CRG from the CHASSIS. (Refer to “4. Remove ASS’Y CRG from CHASSIS”.)
4) Remove the ASS’Y CLAMPER. (Refer to “10. SWITCH4, SWITCH5 5)”.)
5) Remove the SPRING in the order of a, b then c.
6) Remove the ARM STOPPER B by rotating it counter-clockwise.
7) Remove the BELT and push the ASS’Y SLIDER 2 to the front.
8) While pushing the HOOK under the PULLEY A and push it to the front to remove the ASS’Y.
Fig.11
P/U UNIT
Fig.12-a
Fig.12-b
SPRING
c
a
b
ARM STOPPER B
Fig.12-c
Fig.12-d
ARM SLIDER 2
BELT
HOOK
PULLEY A
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
