-19-
CD MECHANISM DISASSEMBLY INSTRUCTIONS AND RE-ASSEMBLY INSTRUCTION -12/14
2. ASS’Y CRG
1) Confirm position of the CAM RR 3. (Refer to “1. ASS’Y HOLDER, ASS’Y GEAR DRIVE”.)
2) Insert the ASS’Y CRG A201 (No.2) and engage the PINION as shown in illustration.
3) Rotate the BEVEL GEAR clockwise.
Insert the ASS’Y CRG into the DRAWER.
4) When the first ASS’Y CRG A201 (No.2) is inserted correctly, insert the second ASS’Y CRG A101 (No.1) in the same way as step 2).
5) When you rotate the BEVEL GEAR clockwise, the first ASS’Y CRG A201 will be raised by the STAR GEAR. Then raise the ASS’Y CRG
A201 by holding it with hand so that it should not be stacked.
6) Rotate the BEVEL GEAR further. Then second ASS’Y CRG A101 DRAWER will be installed in the correct place.
7) Confirm again that position of the CAM RR 3 is correct.
Fig.2-a
PINION
ASS'Y CRG A201
Fig.2-b
BEVEL GEAR
ASS'Y CRG A201
ASS'Y CRG A101
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299