13
To record radio programs and
external equipment
Use only type I (normal) tapes.
1
Press
z
PUSH EJECT to open the cassette holder.
2
Insert the recordable tape.
3
Prepare the source.
To record radio programs, press TUNER/BAND and tune
in the desired station.
To record from connected external equipment, press AUX
and prepare the equipment.
4
Press REC START/PAUSE twice to start recording.
When recording input from connected equipment,
manually start playback of the source.
To stop recording
Press
s
.
To pause recording (only for TUNER or AUX source)
Press REC START/PAUSE. Press again to resume.
To record a 4-second blank space (only for TUNER
or AUX source)
Inserting 4-second blank spaces may help you locate the
beginning of the track on other equipment with the "Music
Sensor" function.
1 Press
c
TAPE (REC MUTING) on the unit during recording
or in recording pause mode.
"
MUTING
" flashes in the display for 4 seconds (a blank
space is added) and then the unit enters recording pause
mode.
2 Press REC START/PAUSE to resume recording.
To record a blank space shorter than 4 seconds, press again
while "
MUTING
" flashes.
To record a blank space longer than 4 seconds, press again
after the unit enters recording pause mode.
Each time the button is pressed, a 4-second blank space is
added.
To erase a tape
1 Insert the tape. Set the tape to the desired point if needed.
2 Press AUX.
If optional equipment is connected to the AUX IN jacks, turn
it off.
3 Press REC START/PAUSE twice.
To prevent accidental erasure
Remove the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.
To record a CD
Use only type I (normal) tapes.
1
Press
z
PUSH EJECT to open the cassette holder.
2
Insert the recordable tape.
Insert with the exposed side down, and the side to be
recorded on first facing out from the unit. Press
z
PUSH
EJECT to close the cassette holder.
3
Press FUNCTION on the remote repeatedly to
select the CD function, and load the disc.
To record only one track, start play of the track.
4
Press SYNCHRO REC.
The unit enters the recording pause mode, and "
REC
"
indicator flashes on the display.
5
Press REC START /PAUSE to start recording.
"
MUTING
" flashes in the display for 10 seconds and
recording starts.
When only a track is to be recorded, CD playing returns
to the beginning of the current track and recording starts.
•Volume or tone adjustment(s) does not affect recording.
•"
NO TAB
" is displayed if you attempt to record a tape
with the tab broken off.
•Only one side of the tape can be recorded at a time.
To record a selected set of tracks from a CD
Program the desired tracks (see "Programmed play" on page
9) and then press SYNCHRO REC.
TAPE RECORDING
Side A
Tab for side A
