FS1-X v1.1
www.aja.com
19
When you edit a parameter containing multiple values, such as the IP address, the value
currently being edited blinks.
Operational Summary
The nine front panel pushbuttons allow you to select display menu groups. The two
knobs allow you to change menus and set parameters within the menu groups. These
functions can be summarized as follows:
• Select a menu group: Press one of the ten pushbuttons.
• Scroll through menus in a group: Turn
SELECT
.
• Edit a menu parameter: Stop
SELECT
on the menu.
• Change a parameter value: Once the parameter is selected with
SELECT
, turn
ADJUST
to
set the value. Changes apply in a few seconds.
• To edit a multiple part parameter, such as the IP address, push the
ADJUST
knob
momentarily (the value blinks). To save the whole parameter after editing, push
ADJUST
momentarily again.
• Coarse adjust a value: Hold down the menu group button (the button turns blue) and
turn
ADJUST
.
• Undo a change (restore previous setting): Push
SELECT
momentarily.
• Reset to factory default: Hold down
ADJUST
for 4 seconds.
Pushbuttons
The general rules of Menu Group button operation are:
• Press one of the nine Menu Group buttons to access the associated menu group. The
SELECT
and
ADJUST
knobs control the display menus.
• The selected Menu Group button lights and the other buttons turn off.
• Each menu group returns to the last menu changed when you select the button. After a
reboot, each group displays its first menu.
• Hold down a button (turns blue) to make coarse adjustments using the
Adjust
knob.
Release the button to make fine adjustments.
The following text briefly lists the functions accessed by each pushbutton:
STATUS
Displays the Status Menu Group, which shows current machine status and error
conditions:
• Video 1, Video 2, and Caption status
• Reference and Genlock status
• Output Status
• Power and Temperature status
• System Name display
• Alarms
• FRC status
• Audio Output routing
REMOTE
Displays the Remote Menu Group, which lets you select how to control the FS1-X:
• Control by local front panel, or local and remote
• Authentication
• GPI input and output behavior
CONFIG
Displays the Config Menu Group, which lets you configure the FS1-X for your
environment:
• System Name setting
