1
57
FS1 Installation and Operation Manual — 21.0 Audio Output Phase
21.0 Audio Output Phase
This parameter enables or disables individual audio phase adjustment of the eight FS1
audio output channels. When
Adjust
is selected, parameters
21.1
through
21.8
are then
used to adjust phase for the eight channels.
Note:
If parameter 4.5
Audio Follow Video
is set to
On
, then Audio Output Phase
selection is independently kept for each separate input:
SDI 1
,
SDI 2
,
Composite
,
S-Video
,
and
Component
. If
Audio Follow Video
is set to
Off
, then another
Audio Output Phase
selection is used. This note applies to Parameters
21.0
through
21.8
.
21.1 Audio Phase Ch1
This parameter selects whether audio phase is normal (same as passed from the input)
or inverted on channel 1.
Note:
If parameter 4.5
Audio Follow Video
is set to
On
, then
Audio Phase Ch1
selection
is independently kept for each separate input:
SDI 1
,
SDI 2
,
Composite
,
S-Video
, and
Component
. If
Audio Follow Video
is set to
Off
, then another
Audio Phase Ch1
selection is
used. This note applies to parameters
21.1
through
21.8
.
21.2 Audio Phase Ch2
This parameter selects whether audio phase is normal (same as passed from the input)
or inverted on channel 2. Parameter adjustments are the same as
21.1
.
21.3 Audio Phase Ch3
This parameter selects whether audio phase is normal (same as passed from the input)
or inverted on channel 3. Parameter adjustments are the same as
21.1
.
21.4 Audio Phase Ch4
This parameter selects whether audio phase is normal (same as passed from the input)
or inverted on channel 4. Parameter adjustments are the same as
21.1
.
21.5 Audio Phase Ch5
This parameter selects whether audio phase is normal (same as passed from the input)
or inverted on channel 5. Parameter adjustments are the same as
21.1
.
21.0 Audio Output Phase
Description of Choices
Parameter Adjustments:
Normal (
default
)
Adjust
Disable audio phase adjustments.
Enable audio phase adjustments for the eight audio channels.
21.1 Audio Phase Ch1
Description of Choices
Parameter Adjustments:
Normal (
default
)
Invert
Phase is unaltered as it passes from the input to the output.
Phase is inverted as it passes from the input to output. (This may be useful to
correct analog audio signals that are incorrectly wired, placing audio out of
phase at input.)
