Hi5-12G Mini-Converter v1.4 14 www.aja.com
Switch Over Priority
Selects which input (SDI or Optical) is the preferred input. This selection is valid
only when an AJA optical SFP is installed. If and when the selected input signal is
no longer detected, the auto switchover circuit will fail over to the non-priority
input if present.
Choose from Last Valid Input, SDI Input, or Optical Input.
3G-B Mode
Selects the 3G level B Video Mode. Choose from the following:
• Auto - automatically selects the format based on the input video parameters.
• Level B-DL
• B-DS Link 1 - use Link 1
• B-DS Link 2 - use Link 2
Output Tab Screen
Click on the Output tab to view and make changes to the Hi5-12G Output
settings.
Color Space
Selects the Output Video Color Space. Note that DVI output is limited to 4:4:4
RGB. Choose from the following:
• Auto - selects the video format based on the input video and the attached
device’s capabilities.
• 4:2:2 YCbCr
• 4:4:4 RGB
• 4:4:4 YCbCr
• 4:2:0 YCbCr