Io X3 Capture, Display, Convert v16.2 24 www.aja.com
Video Input
Source
The pulldown menu allows you to select the currently selected video input
source. Select from:
• Auto - Automatically selects the source depending on input format.
• SDI 1, SDI 2, SDI 3, or SDI 4
• SDI 2x HD
• HDMI
SDI Config
• Auto - Automatically selects the source depending on input format.
• 2-In 2-Out - SDI 1 and SDI 2 will be used for individual input sources and SDI 3
and SDI 4 will be used for outputs.
• 4-In - SDI 1 - 4 will all be used for individual input sources, required for
MultiView operation.
NOTE: Only HD input sources can be used when "4-In" is selected for SDI Config and
"MultiView" is selected for HDMI Output. See
for
more information.
SDI Color Sp
• Sets the color space. Select from Auto, YUV, or RGB.
SDI RGB Rng
Sets the RGB range. Select from Auto, SMPTE, or Full.
Audio Input
Select
This pulldown menu allows you to pick where the audio comes from. Select from:
• Auto
• Analog
• HDMI
• SDI 1 Ch1-16
• SDI 2 Ch1-16
Ch Map
If only two channels were selected in the third-party application you are using,
you can select which two channels will be mapped to that application. Different
Audio Input selections have different channel mapping capabilities. Select from:
• 1-2 to 1-2
• 3-4 to 1-2
• 5-6 to 1-2
• 7-8 to 1-2
• 9-10 to 1-2
• 11-12 to 1-2
• 13-14 to 1-2
• 15-16 to 1-2
NOTE: This setting does not affect the embedded audio being sent to the Io X3's BNC or
HDMI output connectors.
